01 — French PU moulding & crown trim
Trim that turns the corner.
Polyurethane profiles that bend to arches and radius walls, shrug off damp rooms, and finish a corner without a mitred cut. Corner appliques from 90 mm to 240 mm.
The material
Traditional decorative trim asks you to choose which compromise you can live with. Plaster is beautiful and cracks on a curve. MDF is cheap and swells the first humid summer. Timber moves. All three need a carpenter who can close a mitre.
Ours is polyurethane, made with an eco-friendly foaming process. It bends, it does not absorb water, it is flame-retardant, it weighs a fraction of plaster, and it goes up with adhesive. It takes paint like primed wood, so once finished it reads as architecture rather than as something applied.
PU against the alternatives —
| PU (ours) | Plaster | MDF | Timber | |
|---|---|---|---|---|
| Follows a curve | Yes — bends to arches and radius walls | No — cracks | No | Only if custom-milled |
| Damp rooms | Moisture-resistant | Absorbs moisture | Swells | Moves and splits |
| Weight | 0.2–0.8 lb per corner | Heavy | Moderate | Moderate |
| Fixing | Adhesive only | Mechanical + skim | Pin and fill | Pin and fill |
| Finish | Takes paint like wood | Paintable | Paintable | Paint or stain |
The corner problem
Stop cutting mitres.
A 45-degree joint has to be perfect on a wall that is never quite square. A corner applique sits over the junction, so the two straight runs simply arrive and stop. The cut stops being the thing you are judged on.
It is the single most common reason our corner pieces get specified — not decoration for its own sake, but a way to get a crisp result without a finish carpenter on site.
Corner applique sizes —
Every corner we hold, smallest to largest. Send a room height and a photograph and we will tell you which one is right — oversizing a corner is the most common specification mistake in this material.
| SKU | Size | Weight | Character |
|---|---|---|---|
| AD435-28 | 90 × 90 mm | 0.2 lb | Smallest corner — slim trim, picture-frame moulding |
| AD435-24 | 120 × 120 mm | 0.2 lb | Open S-scroll, decorates without filling the corner |
| JH10 | 164 × 164 mm | 0.3 lb | Flowing acanthus — the most adaptable mid-size |
| JH04 | 180 × 180 mm | 0.4 lb | Rosette centre, softer and more floral |
| SH5127 | 190 × 190 × 17 mm | 0.4 lb | 17 mm deep — throws shadow in high rooms |
| JH16 | 240 × 240 mm | 0.8 lb | Largest corner, asymmetric sweeping tail |
| AD-416-19 L/R | 278 × 124 mm | 0.3 lb each | Mirrored pair — frames doors, mirrors, panel edges |
Weights are per piece. AD-416-19 is supplied as a mirrored left/right pair — the only handed item in the range. All prices in CAD.
Where it goes —
-
Ceilings
Cornice, coving and medallions. The plane nobody details, and the one that makes a standard eight-foot room read taller.
-
Panel walls
Framed panels with appliques at the corners. Painted wall-colour, the relief does the work instead of the contrast.
-
Stairs & arches
Stringer brackets and arched surrounds — the raked and curved runs where rigid trim cannot follow the line.
-
Colour
Finished in the wall colour rather than white. Same profile, completely different register.
-
Medallions
Ceiling roses sized to the fixture, not to the room. The centrepiece a bare pendant is missing.
-
As supplied
Unpainted white, crisp relief, light enough to hold in one hand. What actually arrives in the box.
Questions we get asked —
- Is PU moulding actually suitable for a bathroom?
- Yes. Polyurethane does not absorb water, so it will not swell, warp, or grow mould the way MDF and timber do. It is the reason we carry it instead of MDF: bathrooms, kitchens, basements and laundry rooms are exactly where conventional trim fails first.
- How tight a curve will it follow?
- Our flexible profiles are made for arched openings and radius walls, which is the main reason designers specify them over plaster or timber. Bend tolerance depends on the specific profile, so send us the radius and we will confirm before you order rather than guess.
- What is a corner applique, and why does it matter?
- It is a decorative piece that sits at the corner of a panel or trim run, so the two straight lengths meeting there do not need a mitred joint. If you have ever fought a 45-degree cut that would not close, that is the problem it removes — the applique covers the junction and the cut stops being visible.
- Can I paint it to match my walls?
- Yes, it takes paint like primed wood. The profiles arrive unpainted white and are routinely finished in the same colour as the wall so the relief reads as shadow rather than as an applied ornament.
- Can I order online?
- In-stock corner appliques and medallions are priced per piece and can be ordered directly. Trim, crown moulding and full runs are overlength items whose freight cost changes with destination, so those are quoted individually — email info@uchain.ca with your list and delivery address and we will price the shipping properly instead of loading a guess into a cart.
- Do you send samples?
- Yes, free of charge — you cover shipping only. For a material you have not specified before, we would rather you handle it first.
Send us the drawing.
Tell us the room, the run lengths and where it is going, and we will come back with the right profiles and an honest freight number. Samples are free — you cover shipping only.