Shipping across Canada & the USA — samples free, you cover shipping
U-Chain Request a quote

FAQs

Straight answers.

15 questions we actually get asked — including the ones where the answer is "no, and here is why". If yours is not here, ask us directly.

The material

What polyurethane moulding actually is, and how it differs from what you may have specified before.

What is PU moulding, and how is it different from plaster or MDF?

PU moulding is decorative trim cast from high-density polyurethane rather than carved from plaster, milled from timber, or pressed from MDF. It is made with a foaming process, which is why a large corner applique weighs well under a pound.

The differences that matter on site are all consequences of the material. It does not absorb water, so it will not swell in a bathroom or basement the way MDF does or move the way timber does. It flexes, so it will follow an arched opening or a radius wall instead of cracking like plaster. It is light enough to fix with adhesive alone, with no mechanical fixing into the substrate and no skim coat afterwards. And it takes paint like primed wood, so once finished it is not obviously a different material from the wall.

What you give up is the authenticity argument. If a heritage project requires genuine lime plaster, this is not a substitute. For everything else, it removes the compromise that usually forces the choice.

Is it suitable for a bathroom, kitchen, or basement?

Yes — those rooms are the main reason we carry it. Polyurethane is closed-cell and does not absorb water, so it will not swell, warp, delaminate, or support mould growth. MDF trim in a bathroom will eventually wick moisture through its cut ends and blow out; timber will move with seasonal humidity and open its joints.

The practical caveat is the paint, not the moulding. Use a paint rated for the room, and prime cut ends the same way you would anywhere else. The substrate and the adhesive also need to be sound — nothing bonds reliably to a damp or dusty wall.

How tight a curve will it follow?

Our flexible profiles are made for arched openings and radius walls, which is the main reason designers choose them over plaster or milled timber for curved work. The achievable radius depends on the specific profile — a slim panel moulding will take a much tighter curve than a deep crown profile.

Rather than publish a single number that would be wrong for half the range, send us the radius and which profile you are considering and we will confirm before you order. Email info@uchain.ca with the dimension. If it is marginal we will say so rather than let you find out on site.

Is it fire-rated?

Our polyurethane profiles are flame-retardant, and this is a genuine property of the material rather than a coating that can be damaged in handling.

If your project requires a specific tested rating — a named standard and a certificate you can put in a submittal package — ask us for the current documentation for the profile you are specifying rather than relying on this page. We would rather send you the actual test data than have you rely on a marketing adjective for something a building official will check.


Ordering & pricing

How buying actually works here, including the parts that are deliberately not automated.

Can I order everything online?

No, and the split is deliberate. In-stock corner appliques and ceiling medallions are compact, predictable to ship, and priced per piece — those you can order directly.

Trim, crown moulding, baseboard and full runs are overlength items. Freight on a two-and-a-half metre length changes substantially depending on whether it is going to Toronto, Vancouver, or Texas, and whether it goes ground, ocean, or air. A cart that guessed at that number would either overcharge you or leave us absorbing a loss, so those are quoted individually.

Send your list and the delivery address to info@uchain.ca, or use the form on our contact page, and you will get a real number back.

Is everything you sell shown on the website?

No. The site shows what we hold and what we are confident quoting quickly. Our full catalogue is considerably larger, and we also produce custom profiles.

If you have a profile drawing, a photograph of something you are trying to match, or just a description of what the detail needs to do, send it over. We can usually either supply something close from the catalogue or produce it. Custom and non-stock items carry a longer lead time — see the lead-time question below.

What currency are prices in?

All prices on this site are in Canadian dollars (CAD), including for customers in the United States.

We ship across Canada and the USA, and US customers are quoted in CAD unless you ask otherwise. Import duties and taxes on cross-border shipments are assessed on delivery and are the recipient’s responsibility — we will flag anything we can anticipate when we quote.

Can I get samples before committing?

Yes, and we would prefer you did. Samples are free of charge — you cover the shipping only.

For a material you have not specified before, holding a piece answers questions a photograph cannot: how crisp the relief actually is, how it takes paint, how light it is in the hand. Email us with the profiles you are considering and the delivery address and we will arrange it. If you are choosing between two or three corners, ask for all of them.


Shipping & lead times

Where the timelines actually come from, so nothing is a surprise at checkout.

What is your typical lead time?

It depends entirely on whether the item is in stock. In-stock corner appliques and medallions ship promptly from Markham.

Custom, made-to-order and non-stock catalogue items typically run one to three months from order to delivery, and that figure includes both production and transit. It is a real timeline, not a hedge — these are manufactured to order and then shipped, sometimes by ocean freight.

If you are working to a site date, tell us the date rather than the lead time you are hoping for. We will confirm what is achievable for your specific items before you commit, and say plainly if it is not.

Where do you ship?

Across Canada and the United States. Small in-stock items go by standard courier. Overlength trim and baseboard go by freight, and the method depends on the destination and how quickly you need it.

Because freight is the variable that moves most, the delivery city and postcode is the single most useful thing you can include in a first email. It is the difference between a quote and a guess.


Returns

The full terms, stated plainly.

Can I return or exchange something?

Standard in-stock products can be returned or exchanged within 15 days of delivery. To be eligible, items must be unused, uninstalled, undamaged, and returned in their original packaging in resalable condition. Once a piece has been cut, painted, or adhered, we can no longer take it back.

There is no restocking fee. Return shipping on a change-of-mind return is paid by the customer, and the original outbound shipping is non-refundable. Approved refunds go back to the original payment method within five to ten business days of us receiving and inspecting the item.

Email info@uchain.ca with your order number before shipping anything back — unannounced returns cannot be matched to an order.

What about custom or made-to-order items?

Custom profiles, special-order items and non-stock catalogue products are produced specifically for your project and are not returnable by default.

That is the trade-off for having something made to your drawing. If there is a genuine problem with a custom order — wrong profile supplied, a manufacturing defect, damage in transit — contact us and we will work through it. The exclusion is for changes of mind, not for our mistakes.

What if it arrives damaged?

Contact us within 7 days of delivery with photographs of both the item and its packaging, and we will replace or refund it in full including all shipping costs. You will not be asked to pay return shipping in this situation.

Photographs of the packaging matter as much as the item, because that is what supports a freight claim. If a pallet or carton looks damaged on arrival, photograph it before opening.


Visiting & support

Can I visit and see the materials in person?

Yes. We are at 2710 14th Ave, Markham, ON L3R 0J1, and visits are by appointment so that someone is there and the materials you want to see are out and ready.

Book a time through our contact page, or call or WhatsApp us on (647) 631-4988. If you are bringing a client, tell us in advance and we will set the space up properly.

Do you work with designers and contractors on project pricing?

Yes — that is most of what we do. Designers, architects and contractors specify our materials into client projects across North America.

If you need samples for a presentation, pricing at project quantities, help confirming a material suits a specific application, or documentation for a submittal, contact us directly rather than working through the online store. Tell us it is a trade enquiry and we will handle it as a project rather than an order.


Still unanswered

Ask a real question.

Radius, ceiling height, run lengths, a photograph of the detail you are trying to match — send whatever you have. We would rather answer the specific question than have you guess from a general page.